No products in the cart.
Victron Energy ORION SmartSolar MPPT 100/20_48V
Roll over image to zoom in
$295.95
Victron Energy SmartSolar MPPT 100/20_48V SmartSolar 12V,24V,48V 20A Solar Charge Controller MPPT Type SCC110020160R
Victron Energy ORION SmartSolar MPPT 100/20_48V with Bluetooth for 12-48v Systems – Lithium Compatible
Max. Solar Input 12v Battery System: 290w
Max. Solar Input 24v Battery System: 580w
Max. Solar Input 48v Battery System: 1160w
Max. Solar Currant: 20A
The Victron Energy ORION SmartSolar MPPT 100/20_48V uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks.
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged
- Ultra-fast Maximum Power Point Tracking (MPPT) : Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
- Advanced Maximum Power Point Detection in case of partial shading conditions : If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
- Internal temperature sensor : Compensates absorption and float charge voltage for temperature.
- Optional external battery voltage and temperature sensing via Bluetooth : A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.
- Fully discharged battery recovery function : Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.
- VE.Can: the multiple controller solution : Up to 25 units can be synchronized with VE.Can
- VE.Direct or VE.Can : For a wired data connection to a Color Control GX, other GX products, PC or other devices
- Remote on-off : To connect for example to a VE.BUS BMS.
- Programmable relay : Can be programmed to trip on an alarm, or other events.
- Outstanding conversion efficiency : No cooling fan. Maximum efficiency exceeds 98%.
- Flexible charge algorithm : Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
- Extensive electronic protection : Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.
- Bluetooth Smart built-in : The wireless solution to set-up, monitor, update and synchronize SmartSolar Charge Controllers.
Victron Energy ORION SmartSolar MPPT 100/20_48V
SmartSolar MPPT 100/20 solar charge controller from Victron Energy with:
- 12/24/48V auto select battery voltage
- 20A rated charge current
- 1160W @ 48V maximum PV power
- Automatic load disconnect
- 98% peak efficiency
- Reverse polarity (fuse) protection, output short circuit protection, over temperature protection
Bluetooth Smart built-in: dongle not needed
The wireless solution to set-up, monitor and update the controller using Apple and Android smartphones, tablets or other devices.
VE.Direct
For a wired data connection to a Color Control panel, PC or other devices
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life.
The load output is short circuit proof.
Battery Life: intelligent battery management
When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months.
The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.
Programmable battery charge algorithm
See the software section on our website for details
Day/night timing and light dimming option
See the software section on our website for details
Programming, real-time data and history display options
- Modern Apple and Android smartphones, tablets, MacBook and other devices: see the VE.Direct Bluetooth Smart dongle and the MPPT app discovery sheet for screenshots.
- ColorControl panel
Fully discharged battery recovery function will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.
Additional information
| Weight | .65 kg |
|---|---|
| Dimensions | 6 × 11.3 × 10 cm |
| AH(20HR) | 20A |
| WIDTH | 113mm |
| HEIGHT | 100mm |
| VOLTAGE | 12/24/48V |
Questions and Answers
You are not logged in
Sorry no more offers available
Reviews
There are no reviews yet.